MTN Cans Pro Acrylic Varnish Klarlack 400ml - 3 Varianten

The number one in the Montana Colors range as an acrylic-based clear coat – the MTN Pro Acrylic Clear Coat 400ml spray can.

The MTN Pro Acrylic Clear Spray Can impresses with a particularly precise spray pattern thanks to the perfectly matched valve. This allows for easy regulation when spraying and thus a high variation in line widths, even for extremely fine work. The acrylic clear coat is available in matte, satin and gloss finishes, allowing you to choose the perfect finish for your base coat. The paint is extremely fast drying and can be used on almost all materials. In addition, the special perfumed smell of the paint is noticeable, which, in contrast to other paints, is sweeter than pungent.

- clear coat
- 400ml
- acrylic base
- 3 variants

Instructions for use:

For best results, it is recommended to shake the spray can for at least 20-30 seconds to distribute the pigments. In addition, the can should be sprayed for about three seconds before application to the surface. In extremely hot or cold temperatures, the properties of the spray can may change slightly.

Supplied spray attachment: Original Cap (Pocket Cap)

------------

Hazard statements according to Regulation (EC) No 1272/2008

DANGER

Contains
n-Butyl acetate
Ethyl acetate
2-Methoxy-1-methylethyl acetate
Acetone

Hazard statements
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P271 Use only outdoors or in a well-ventilated area.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container via the selective disposal system.

Supplemental hazard information
EUH066 Repeated exposure may cause skin dryness or cracking.