MTN Cans INDUSTRIAL 2K clear varnish 400ml - 2 variants

The new professional tool from MTN - the MTN Cans INDUSTRIAL 2K clear coat in matt and glossy

The 2K clear coat is a new two-component product from MTN's Industrial series. Mixing the two components of this can makes this industrial product an extremely powerful tool.

This professional tool makes it possible to seal a wide variety of surfaces and is particularly resistant to petrol, moisture, chemicals in general and weathering. In addition, this clear coat does not yellow and thus also maintains the original look. Perfect for machines, car parts, petrol tanks, etc. Furthermore, this clear coat makes it possible to even out small irregularities on the surface.

- two-component clear varnish
- extremely robust
- resistant to petrol, moisture and chemicals
- also withstands industrial demands

Instructions for use:

Shake the can well for one minute, then remove the red cap and place it on the valve on the underside of the can. After hearing the mixing sound, shake the can again for two minutes to mix the components. The clear coat must then be used within twelve hours to achieve the desired result. In addition, the can should be sprayed for about three seconds before application to the surface until pigments can be seen in the spray jet. In extremely hot or cold temperatures, the properties of the spray can may change slightly. Use on clean and dry surfaces. Do not use on connected devices and only use in well-ventilated areas.

Supplied spray attachment: Jet Cap (Calligraphy Cap)

--------------
Hazard warnings!

H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.